13
14
Getting started
1
.....................
Set-up
1.1
Removing or installing the back cover
Inserting or removing the SIM card
(1)
You must insert your SIM card to make phone calls. Please power off your
phone before inserting or removing the SIM card.
one touch 602
one touch 602D
1
2
(1)
Check with your network operator to make sure that your SIM card is 3V or
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
and slide it out.
one touch 602D, two SIM cards can be inserted.
is for SIM1,
is for
SIM2.
Removing and installing the battery
Insert and click the battery into place, then close the telephone cover.
•
Unclip the cover, then remove the battery.
•
Charging the battery
(1)
Standard charger (EUP)
Universal charger
Connect the battery charger to your phone and mains socket
respectively.
The charging may take about 20 minutes to start if the battery is flat.
•
Be careful not to force the plug into the socket.
•
(1)
Depending on your country.
Summary of Contents for One Touch 602
Page 1: ......
