17
18
Getting started
1.2
Set-up
1.2.1
Inserting or removing the SIM card and microSD card
(1)
You must insert your SIM card to make phone calls. Please power off your
phone before inserting or removing the SIM card and microSD card.
Inserting or removing SIM cards
(2)
There are two SIM card slots on the phone. You can insert one or two
SIM cards into slots. Please power off your phone before inserting or
removing SIM cards.
Your phone only support micro-SIM card. Please contact network operator
and use professional scissors prune SIM card to micro-SIM card.
To install, take off micro-SIM card protector, insert the micro-SIM card
into the slot with chip facing downward, and then cover the slot.
To remove the card, open micro-SIM card protector, gently press it out,
and then cover the slot.
Steps for removing and installing microSD card are the same with steps
for micro-SIM card
(1)
.
(1)
6012X
only.
(2)
6012D
only.
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
When using your telephone for the first time, charge the battery fully
•
(approximately 5 hours).
You are advised to fully charge the battery ( ). Charging status is
indicated by the percentage on screen while the phone is powered off. The
percentage increases as the phone is charged.
The charging status bar will not float if your battery is extendly
consumed. To reduce power consumption and energy waste,
when battery is fully charged, disconnect your charger from the
plug; switch off Wi-Fi, GPS, Bluetooth or background-running
applications when not in use; reduce the backlight time, etc.
Power on your phone
1.2.2
Hold down the
Power
key until the phone powers on, unlock your phone
(Slide, PIN, Password, Pattern, Face unlock or Voice unlock) if necessary
and confirm. The Home screen will display.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your phone. Store
this information in a safe place when not in use.
