Alcatel ONE TOUCH 5035E, User Manual

Page: 39 / 76

75 76
Getting connected
6
................
To connect to the internet with this phone, you can use GPRS/EDGE/3G
networks or Wi-Fi, whichever is most convenient.
Connecting to the Internet 6.1
GPRS/EDGE/3G 6.1.1
The first time you turn on your phone with SIM card inserted, it will
automatically configure network service: GPRS, EDGE or 3G. If the network
is not connected, you can press and hold
on notification panel.
To check the network connection you are using, drag down notification
panel and touch to access
Settings , then touch More...\Mobile
networks\Mobile network settings\Access Point Names
or
Network operators .
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone
with the following steps:
Drag down notification panel and touch • to access
Settings
.
Touch • More...\Mobile networks\Mobile network settings\Access
Point Names
Then touch Menu icon • again and touch
New APN
.
Enter the required APN information. •
When finished, touch Menu icon • and touch Save .
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
Drag down notification panel and touch • to access Settings .
SIM management\Roaming.
•
Mark/Unmark the • Data roaming checkbox to activate or deactivate
data roaming.
When Data roaming is deactivated, you can still perform data exchange
•
with a Wi-Fi connection (refer to “ 6.1.2 Wi-Fi ”).
Wi-Fi 6.1.2
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on your phone even
without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
Drag down notification panel and touch • to access Settings .
Touch the switch • beside Wi-Fi to turn on/off Wi-Fi.
Touch • Wi-Fi , the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
Touch a Wi-Fi network to connect. If the network you selected is
•
secured, you are required to enter a password or other credentials (you
may contact your network operator for details). When finished, touch
Connect .