By NCK Team
L2 Repair Document
TCT
Mobile Limited
Rev.
ONE TOUCH 4005D Level 2 Repair Document
Page
1.2
18/29
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Step 10: Seperate touch lens from furnished front casing by using hot wind gun to heat up touch lens around the
four edges (Temperature: 100
℃
, Air Level: 3, Height:5-10mm, Time:<60s) .
Note
：
if you repair the touch panel, then TP foam adhesive(below picture item1) and top/bottom adhesive for TP
(below picture item2) are needed to be changed.
