Alcatel OmniStack OS-LS-6224, Getting Started Manual

Page: 19 / 52

Description of Hardware
1-7
1
Status LEDs
The LEDs, which are located on the front panel for easy viewing, are shown below
and described in the following table.
Figure 1-2. Port LEDs
Figure 1-3. Combo Port LEDs
Table 1-1. Port Status LEDs
Port Status LEDs
LED Condition Status
RJ-45 Ports
Non-POE
On Green A port has established a valid network connection, it is
linked.
Flashing Green Activity has been detected on the port.
POE On Amber A port has established a valid network connection, it is
linked.
Flashing Amber Activity has been detected on the port.
Combo Ports
On Green An SFP transceiver port has established a valid 1000 Mbps
network connection. The associated RJ-45 port is disabled.
Off An SFP transceiver port has no valid link, or the link has
failed. The associated RJ-45 port is enabled.
Flashing Green An SFP transceiver port has established a valid 1000 Mbps
network connection, and activity has been detected on the
port. The associated RJ-45 port is disabled.
Stacking Ports
Off The Stacking port is currently not linked.
Green The Stacking port is currently linked.
Green Blinking The Stacking port is currently linked as is forwarding traffic.