Installation Guide: 601, 602, and 604 Routers
53
5
T
ROUBLESHOOTING
This chapter provides general troubleshooting tips in addition to network tests and diagnostics
information for the Alcatel OmniAccess 601, OmniAccess 602, and OmniAccess 604 router.
Alarms and System Status
The OmniAccess 601, OmniAccess 602, and OmniAccess 604 router reports various alarms
upon detecting certain irregular conditions in the incoming WAN signals. For more information
about the command line interface and system commands, refer to the appropriate Alcatel
Command Reference Guide (either the domestic or international version).
NOTE:
The slot and/or interface number is required for commands displaying information on specific
interfaces. If this information is not included when the command is issued, the system prompts for it. For
more information about a command, access command help by typing
help <command name>
and
pressing
Return
.
To view alarms, use the appropriate derivative (T1/E1) of the following command:
show module alarms t1
Use this command to view the current alarms for any T1 WAN link of the system.
You can display the current configuration and operating status of each WAN link using use the
appropriate derivative (T1/E1)of the following command:
show module configuration t1
Use this command to view the current configuration of the selected WAN link, along
with its line status.
WAN Statistics
In addition to WAN status and alarms, the router collects and stores various types of
performance statistics. This data helps you analyze the quality of a WAN link between the
OmniAccess 601, OmniAccess 602, and OmniAccess 604 router and the far-end WAN
equipment.
To display WAN statistics, use a derivative of the following command:
show module userstats t1
Use this command to view user statistics gathered for the WAN interface.
