OmniAccess 602
OmniAccess 602 Front Panel
The router front panel houses the system LEDs.
Figure 3 OmniAccess 602 Router Front Panel
OmniAccess 602 Back Panel
The OmniAccess 602 router back panel provides connections for two WAN ports, two 10/100
Base-T Ethernet ports, one AUX port, one Console port, and a 12 VDC power input jack.
Figure 4 OmniAccess 602 Router Back Panel
LEDs
The OmniAccess 602 front-panel LEDs indicate real-time unit status. Table 6 provides
information about how to interpret the LED states.
WAN Port
LEDs 1-2
Ethernet 0 LEDs
Ethernet 1 LEDs
Power LED
LINK/ACT HS
DUP
LINK/ACT HS
DUP
WAN Ports 1 - 2
Fast Ethernet
Port 0
Fast Ethernet
Port 1
AUX Port
Console
Port
12 VDC
Input Jack
Table 6 LED Descriptions
Port
Description
Color
WAN STATUS 1/ 2 Indicates traffic activity
on this interface
Green = normal activity
Red = alarm state
Yellow = test mode
ETHERNET 0 / 1
LINK/ACT
Indicates traffic activity
on this interface
Green = link is operational
Blinking Yellow = either receiving or sending
traffic
Red = packet collisions
