Alcatel AST570, User Manual

Page: 139 / 300

Configuration figure
Local premisses
configuration
12 Configuration and Use - CIP & IP Routing
139 / 300
3EC 17766 AAAA TCZZA Ed. 04
12.2.7 Example Configuration
The configuration of a Classical IP LIS is illustrated with the
following example:
ETH AT
M
AT
M
ETH
Symbolizes an VP/VC cross-connect
10.0.0.2
255.0.0.0
10.0.0.138<-0.0.0.0
10.0.0.1
255.0.0.0
10.0.0.138<-0.0.0.0
10.0.0.138
255.0.0.0
172.16.1.2
255.255.255.0
192.168.0.1
255.0.0.0
192.168.0.2
255.255.255.0
0.0.0.0.->192.168.0.1
8/80
8/80
172.16.1.2<-0.0.0.0
172.16.1.1
255.255.255.0
10.0.0.0->172.16.1.1
LIS 172.16.1.x
Subnet 10.1
Local Servers
1 2
In the drawing above a LIS, 172.16.1.x, represented by the
ellipse, runs between the AST570(1) and access router(2).
At the local premisses an IP network, 10.x.x.x, is created.
An IP address is configured on the Ethernet port (10.0.0.138).
On the DSL side of the
AST570(1) one CIP member is by default
enabled. This CIP member is configured with IP address
172.16.1.1 and is part of the LIS 172.16.1.x.
One VC in the
AST570(1) phonebook (CIPPVC1), is explicitly
assigned to this CIP member. This VC(8/80) is crossconnected to
the remote destination.