C
ALLER
ID
While you have a caller ID, the display will show as follow:
IMPORTANT:
In order to use the Caller ID functions with
this unit, you must subscribe to Number Caller ID Service.
R
ECEIVING
A
ND
S
TORING
C
ALLS
When you receive a call, the information is transmitted
by the phone company to your Caller ID telephone
between the first and the second ring.
When the memory is full, a new call automatically replaces the
oldest call in memory.
C
ALL
W
AITING
With Call Waiting Caller ID service, a tone alerts you
while you are on the phone that there is an incoming call.
You will experience a short period of silence as the Caller
ID information is processed.
1. When a call waiting signal is received, Call Waiting
flashed in the display. The name and telephone
number of the person calling appears in the display
for
20 seconds.
2. Press FLASH to put the existing call on hold and
answer the new call.
3. When you finish the call, press FLASH to return to
the original call.
4. If you choose not to answer the call, the Call Waiting
ID information is stored for future reference.
IMPORATANT:
To know who is calling while you are on
the phone, you must subscribe to Caller ID with Call Waiting
Service from your local telephone company.
R
EVIEWING
R
ECORDS
As calls are received and stored, the display is updated to
let you know how many calls have been received.
1. Press the “ < ” button to get into CID mode and to
scroll through the call records from the most recent
to the oldest.
2. Press the “ > ” button to scroll through the call
records from the oldest to the newest.
M
EMORY
Store up to ten 28-digit numbers and 15 characters in
memory for quick dialing.
S
TORING
A N
UMBER
I
N
M
EMORY
1. Press “STORE” button, LCD displays “M0-M9”.
2. Press a numeric key (0,1,2,3,4……or 9) of desired
memory location.
3. Press “STORE” button again, the last number digit will
twinkle.
4. Use the number keypad to enter the telephone number
you want to store (up to 28 digits).
5. Press “STORE” button again to save the phone number
and then, the first character start to twinkle.
6. Input the name you want to save. (up to 12 characters)
7. Press “STORE” button again to save the name.
8. Press “FLASH” button to exit .
C
HANGING
A S
TORED
N
UMBER
1. Press “STORE” button, LCD display “M0-M9”.
2. Press a numeric key (0,1,2,3,4……or 9) to select the
memory location you want to modify.
3. Press “STORE” button again, the last number digit will
twinkle.
4. Press “DEL “ button repeatedly to delete the old
number, then input a new number you want to store.
5. Press “STORE” button again to save the new phone
number, and then the first character will twinkle.
6. Press “DEL “ button repeatedly to delete the old name,
then input a new name you want to store.
7. Press “STORE” button again to save the new name.
8. Press “FLASH “ button to return to idle mode.
S
TORING
A R
EDIAL
N
UMBER
1. Press “REDIAL” button to get into redial record menu
2. Press “REDIAL” button repeatedly to select a dialed
number.
3. Press “STORE” button, LCD display “M0-M9”.
4. Press 0-9 button to select a desired memory location.
5. Press “STORE” to save the phone number
6. Press “STORE” again to save the caller’s name.
7. Press “FLASH “button to return to the idle mode.
D
IALING
A
STORED
N
UMBER
1. When the phone is off.
2. Press “DIAL” button, display “M0-M9”.
3. Press Number Keypad <0...9> to enter the phonebook.
4. Press “DIAL” button or press “SPEAKER” button or
pick up the handset, then the number will be dialed out
automatically.
OR
1. When the phone is on the line.
2. Press “DIAL” button, display “M0-M9”.
3. Press Number Keypad <0...9> to select a memory
location.
4. The unit will dial out the number stored in the memory.
IMPORTANT:
If you make test calls to emergency numbers
stored in memory, remain on the line and briefly explain the
reason for the call to the dispatcher. Also, it’s a good idea to
make these calls in off-peak hours, such as early morning or
late evening.
G
ENERAL
P
RODUCE
M
AINTENANCE
To keep your telephone working and looking good, follow
these guidelines:
!
DO NOT expose to direct sunlight or moisture.
!
Avoid dropping and other rough treatment to the phone.
!
Clean with a soft cloth.
!
Never use a strong cleaning agent or abrasive
powder because this will damage the finish.
!
Retain the original packaging in case you need to ship
the phone at a later date.
M
ESSAGE
I
NDICATORS
The following indicators show the status of a message or of
the unit.
--E-- Caller information has been interrupted during
transmission or the phone is excessively noisy.
P The person is calling from a number that has
been blocked from transmission.
O
Call is from out of area
T
ROUBLE
S
HOOTING
T
IPS
C
ALLER
ID
Problem
Solution
No Display
Try replacing the batteries. Make sure
the batteries are properly installed.
Did you order Caller ID service from
your local telephone company?
Caller ID Error
The unit displays this message if it Mes-
sage detects anything other than valid
Caller IDinformation during the silent
period after the first ring. This mes-
sage indicates the presence of noise
on the line.
T
ELEPHONE
Problem
Solution
No dial tone Check installation:
Is the telephone line cord connected
to the base unit and the wall jack?
Disconnect the base from the wall
jack and connect another phone to
the same jack. If there is no dial tone
in the second phone, the problem
might be your wiring or local service.
Make sure the battery is properly full.
Are the batteries installed correctly?
Dial tone is OK, Make sure the tone/pulse setting is
but can't dial out correct.
Does not ring
Try to set the Ringer to a higher level.
You may have too many extension
phones on your line. Try unplugging
some phones.
See solutions for No dial tone.
T
RANSFERRING
CID R
ECORDS
T
O
M
EMORY
You may transfer a Caller ID record to your phone’s
memory.
1. Press “ < ” or “ > ” button to scroll your desired record.
2. Press “STORE” button, LCD displays “M0-M9”.
3. Press 0-9 button to select a desired memory location.
4. Press “STORE” to save the phone number
5. Press “STORE” again to save the caller’s name.
6. Press “FLASH “button to return to the idle mode.
D
ELETING
T
HE
C
URRENT
CID R
ECORD
1. Press “ < ” or “ > ” button to scroll the desired record.
2. Press “DEL” button to confirm to delete the current
record.
D
ELETING
A
LL
CID R
ECORDS
1. Press “ < ” or “ > ” button to display the CID records.
2. Press and hold ”DEL” button for 3 seconds, LCD
displays “ERASE ALL”.
3. Press “DEL” button again to confirm to delete all CID
records.
D
IALING
A C
ALLER
ID N
UMBER
1. Press the “ < ” or “ > ” button to display the desired
Caller ID record.
2. If you want to modify it, you can press number key to
add number to the front of the record, or press “#”
button to truncate the leftmost digit of the CID.
3. Press “SPEAKER” button or press “Dial” button or pick
up the handset. The number is dialed out
automatically.
M
EMORY
D
IALING
!
Did you program the memory location keys correctly?
!
Did you follow proper dialing sequence?
!
Make sure the tone/pulse setting is correct.
Model CE29362
XXXXXXXX(Rev.00 E)
2004-11-06
Printed in PRC
0713P121-A
Caller ID phone number
CID Number of calls
Caller ID phone name
M 1 = A B C D E F G H I J K L
