Alcatel-Lucent Stellar AP Series Deployment & Configuration & Troubleshooting Manual Download

Page: 44 / 72

Stellar AP | Deployment & Configuration & Troubleshooting Guide

43 |

P a g e

All

rig

hts

d. Pass

ing

f th

t, u

se and

ati

f i

ts c

ten

t p

itte

itho

ritte

n a

uth

izati

-N

etw

ks.

Features and Configurations

4.6

ACS & DRM

4.6.1

Feature description

Adjacent APs need to use different radio channels to prevent interference between them.

APs within range of each other should always be set to non-interfering channels to

maximize the capacity and performance of the wireless infrastructure. Please check

chapter

3.1.3

for more detail.

To avoid mutual interference with adjacent APs, ACS (auto channel selection) could be used

to make the AP to check and select a best channel under the radio environment

automatically. The algorithm will help the AP to find the channel with best radio

performance.

And if working on 5G radio, the DRM could be used to

define a “Channel List” to make the

AP to select the channels from the list.

4.6.2

Configuration and Recommendation

•

go to “

Wireless

” sub

-menu. As below.

•

Go to “

” configuration, and select the

AP to be configured.

Summary of Contents for Stellar AP Series









































































Search results

Summary of Contents for Stellar AP Series

Reviews:

Related manuals for Stellar AP Series

Brands by name

Popular brands

Alcatel-Lucent Stellar AP Series, Deployment & Configuration & Troubleshooting Manual

Search results

Summary of Contents for Stellar AP Series

Reviews:

Related manuals for Stellar AP Series

Brands by name

Popular brands