Installing Adapter Cards
7705 SAR T1/E1 ASAP Adapter Card Installation Guide
Page 15
Provisioning Requirements
To configure cards and ports, you must be able to access the 7705 SAR-8 or 7705 SAR-18
by console or Telnet connection. Refer to the 7705 SAR-8 Installation Guide or
7705 SAR-18 Installation Guide for information and instructions on console and Telnet
connections.
The CSM does not require provisioning. However, the IOM, which is an integral part of the
CSM software module, must be activated before any adapter cards and port parameters can
be provisioned and configured. The IOM is activated using the
card
and
card-type
CLI
commands to specify its slot number and card type. Adapter cards must be provisioned
before their ports can be configured.
Configure components in the following order:
1. Card slot number (use the
card
slot-number
command)
2. Card type (use the
card-type
card-type
command)
3. Adapter card slot number (use the
mda
mda-number
command)
4. Adapter card type (use the
mda-type
command)
5. Ports (use the
port
command)
Notes:
• IOMs are specified using the
card
and
card-type
commands (items 1 and 2 in the list
below).
• Adapter cards are provisioned and configured using the
mda
and
mda-type
commands
(items 3 and 4 in the list below).
