34
Using WebView
May 2007
OmniSwitch 9000 switches can be configured and monitored
using WebView, Alcatel-Lucent’s Web-based device manage-
ment tool. WebView software is pre-installed in the switch;
you are not required to load additional software.
Note.
Although WebView software is pre-installed, you
must first enable HTTP sessions for your switch before
you can log in. Refer to
“Unlocking Session Types” on
page 22
for more information.
Browser Compatibility
WebView has been tested on the following Web browsers:
•
Internet Explorer 6.0 for Windows 2000, Windows NT,
and Windows XP
•
Netscape 4.79 for Solaris 2.8, and HP-UX 11.0
•
Netscape 7.1 for Windows 2000, Windows NT, and
Solaris 2.8
Logging In to WebView
Note.
Before attempting to establish a WebView session,
be sure that you have first unlocked the HTTP session
type via the
aaa authentication
command. Otherwise, a
login error will occur. See
“Unlocking Session Types” on
page 22
for more information.
To access WebView and log in to a switch:
1
Open any Alcatel-Lucent-tested Web browser.
Using WebView