Alcatel-Lucent CellPipe 7130, Manual

Page: 138 / 154

............................................................................................................................................................................................................................................................
Printer Server USB Service
13-4 3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
............................................................................................................................................................................................................................................................
Printer Server
CellPipe 7130 RG can also be a printer server. The configuration steps is described below:
Windows
1. Plug the USB printer into the CellPipe 7130 RG USB port.
2. Open
Windows setting
.
3. Under
Printer Tasks
, click
Add a printer
to open the Add Printer Wizard and then
click Next .
4. Click A network printer or a printer attached to another computer and then click
Next .
5. Click Connect to a printer on the Internet or on your intranet .
6. Enter the URL of the printer using the following format:
http://Gateway_IP_address:Printserver_port/printers/share_name
Here are the explanation for each field:
Gateway_IP_address: see
Table 6-2 .
Printserver_port: fixed to 631 by gateway.
share_name: Please make a reference to
Table 6-1 (where value can be configrued)
By default the printer server will be:
http://192.168.2.1:631/printers/USBPrinter
7. Follow the instructions on-screen to complete the setup of the network printer.
........................................................................................................................................................
E
N D
O
F
S
T E P S
Mac OS
1. Plug the USB printer into the CellPipe 7130 RG USB port.
2. Open
System Preference
from the Panel.
3. Choose
Print & Fax
from
System Preference
.
4. Configure the settings as shown in Figure 13-3 and click
Add
.