Alcatel-Lucent AOS-W 3.4 MIB, Reference Manual

Page: 24 / 568

24 | Using MIBs AOS-W 3.4 MIB | Reference Guide
Figure 2 CLI Interface
Figure 3 shows how information may be obtained through a graphical user interface ( GUI). The user
interface and the available features vary by application.
Figure 3 Graphical User Interface
WLAN Health Information
This sections lists frequently used MIBs for system health checks. Examples of executing a command
via CLI are also provided. Health check information can be acquired through other MIB browsers, as
described in
MIB Browsers on page 23
.
z Number of Current Authentications per AP z Frame Retry Rate per AP Channel
z Number of Current APs per Switch z Frame Low-Speed Rate per AP Channel
z Number of Down APs per Switch z Frame Receive Errors per AP Channel
z Number of Successful 802.1x Authentications z Total Current Channel Bandwidth (kbps) per AP
z Number of Rogue APs per Switch—Count per
Building z Tx Packets per AP BSSID (32-bit counter)
z Number of Interfering APs per Switch z Tx Bytes per AP BSSID (32-bit counter)
z Noise Level per AP z Rx Packets per AP BSSID (32-bit counter)