Cabling
Purpose
This topic describes the procedures to be followed when connecting the 9962 MSEC v1.0
cables.
Backhaul connection
Each 9962 MSEC v1.0 access point requires at least one data cable to connect the
backhaul. In case of daisy chain, an additional data cable is required (refer to
for details).
The data cable can be a standard Ethernet cable with RJ45 connector or a fiber cable with
an electrical/optical transceiver.
Figure 2-10 Backhaul connection - Star configuration - 2 options
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
installation
Cabling
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01
September 2015
2-19
P
RELIMINARY
P
RELIMINARY
