Alcatel-Lucent 9361 Home Cell V2 Getting Started Manual Download Page 12 | Manualshive

Page: 12 / 15

Alcatel-Lucent 9361 Home Cell V2 Getting Started Manual Download Page 12

9361 Home Cell V2 - Getting Started Guide

11

Step 5: Broadband Connectivity

For a free standing installation, connect the

cables to the 9361 Home Cell V2 after you

place it in the wall bracket/stand.

For wall mounting, connect the cables to the

9361 Home Cell V2 before attaching the 9361

Home Cell V2 to the stand/bracket.

Connect one end of the provided yellow

Ethernet cable to the yellow LAN1 port (LAN

Back haul) on the 9361 Home Cell V2.

If you are using the optional GPS antenna,

remove the dust cap from the 9361 Home

Cell V2’s GPS connector. Then screw the

antenna clockwise onto the GPS connector.

Run the antenna close to a window.

Connect the provided AC power adaptor cord

to the power port on the 9361 Home Cell V2.

To wall mount the 9361 Home Cell V2, first fix the wall bracket/stand to the wall as

shown in the below illustration. Use the stand’s screw holes as guidelines to drill 2 fixing

points. Use the 2 cheese head screws provided to mount the stand on the wall with the

screw holes at the top. Pull the stand downwards so the screws lock into position.

Q

UICK

S

ETUP

«
...
10
11
12
13
14
...
»

Summary of Contents for 9361 Home Cell V2
















Reviews:

No comments