Alcatel-Lucent 8234 User Manual Download

Page: 71 / 80

List of accessories

8AL90386ENABed01

71 /76

8254 DECT Handset

8234 DECT Handset

To remove the battery: Lift the battery out
of the compartment.

Inserting the battery:

•

Position the battery 'connectors '

side as shown in the drawing (A).

•

Terminate the installation of the

battery in its compartment by
pressing as shown in the drawing
(B).

Replace the cover.

If you are using a 8254 DECT Handset,
please make sure that the lock is correctly
positioned.

9.9 Headphone / external microphone

The side of the telephone features a 3.5 mm jack connector for headphone / external microphone. Contact
your retailer for information on the various headphone models available.

The jack is protected by a cover. Lift the cover to plug in the jack connector. The jack connector is a 3.5
mm, 4-pole jack (TRRS standards: CTIA).

Jack connector - CTIA standards

A Microphone

B Ground

C Audio (right)

D Audio (left)

Summary of Contents for 8234

















































































Search results

Summary of Contents for 8234

Reviews:

Related manuals for 8234

Brands by name

Popular brands

Alcatel-Lucent 8234, User Manual

Search results

Summary of Contents for 8234

Reviews:

Related manuals for 8234

Brands by name

Popular brands