Alcatel-Lucent 8234 User Manual Download

Page: 12 / 80

Getting started

8AL90386ENABed01

12 /76

Getting started

In order to have a fully operational 8254/8234 DECT handset, make sure that you have the following items
with your handset: the battery, the AC/DC adapter, and the power supply.

2.1 Unboxing

•

The 8254 or 8234 DECT Handset

with fixed belt clip.

•

The battery.

•

The battery cover.

The safety and regulatory

instructions to be read

carefully.

A desk charger for your phone is needed (single or dual charger). The charger is sold separately.

2.2 Installing the battery in the telephone

8254 DECT Handset

8234 DECT Handset

The 8254 cover contains a lock to prevent
it from opening, for example during a fall.

First you have to unlock the cover.

This step is not necessary for the 8234
DECT Handset.

If the belt clip is installed, you must lift it
up and maintain it in this position during
the battery installation or replacement.

Lift up the cover.

Inserting the battery:

•

Position the battery 'connectors '

side as shown in the drawing (A).

•

Terminate the installation of the

battery in its compartment by
pressing as shown in the drawing
(B).

A B

Summary of Contents for 8234

















































































Search results

Summary of Contents for 8234

Reviews:

Related manuals for 8234

Brands by name

Popular brands

Alcatel-Lucent 8234, User Manual

Search results

Summary of Contents for 8234

Reviews:

Related manuals for 8234

Brands by name

Popular brands