Alcatel-Lucent 8234 User Manual Download

Page: 15 / 80

Getting started

8AL90386ENABed01

15 /76

2.4 Switching on your telephone

•

Press the switch on/off key (Long press).

•

Your telephone is switched on.

If the display fails to light up or the battery icon is flashing, recharge the battery.

If the radio reception icon doesn't appear on the telephone display:

•

Check that you are in an area covered (if you are not, move close to a radio access point).

•

Check that the telephone is properly installed in the system (consult the PABX manager).

Auto install?:

if the display indicates this message, please contact your installation technician or consult the

following chapter: Registering the telephone.

2.5 Switching off your telephone

•

Press the switch on/off key (Long press).

•

Confirm switching off:

Yes

•

Your telephone is switched off.

Summary of Contents for 8234

















































































Search results

Summary of Contents for 8234

Reviews:

Related manuals for 8234

Brands by name

Popular brands

Alcatel-Lucent 8234, User Manual

Search results

Summary of Contents for 8234

Reviews:

Related manuals for 8234

Brands by name

Popular brands