manualshive.com logo in svg

Alcatel-Lucent 7950, Quality Of Service Manual

The Honeywell 7950 is a cutting-edge device designed to enhance your productivity and streamline your everyday tasks. It comes with a comprehensive user manual, available for free download at manualshive.com. This manual provides detailed instructions on setting up and utilizing the full range of features offered by the Honeywell 7950.

Share
Download
background image

QoS Policies

Page 38

7950 XRS Quality of Service Guide

Color Aware Profiling (Policing) 

The normal handling of SAP ingress access packets applies an in-profile or out-of-profile state to 
each packet relative to the dynamic rate of the queue as the packet is forwarded towards the egress 
side of the system. When the queue rate is within or equal to the configured CIR, the packet is 
considered in-profile. When the queue rate is above the CIR, the packet is considered out-of-
profile. (This applies when the packet is scheduled out of the queue, not when the packet is 
buffered into the queue.) Egress queues use the profile marking of packets to preferentially buffer 
in-profile packets during congestion events. Once a packet has been marked in-profile or out-of-
profile by the ingress access SLA enforcement, the packet is tagged with an in-profile or out-of-
profile marking allowing congestion management in subsequent hops towards the packet’s 
ultimate destination. Each hop to the destination must have an ingress table that determines the in-
profile or out-of-profile nature of a packet based on its QoS markings.

Color aware profiling adds the ability to selectively treat packets received on a SAP as in-profile 
or out-of-profile regardless of the queue forwarding rate. This allows a customer or access device 
to color a packet out-of-profile with the intention of preserving in-profile bandwidth for higher 
priority packets. The customer or access device may also color the packet in-profile, but this is 
rarely done as the original packets are usually already marked with the in-profile marking.

Each ingress access forwarding class may have one or multiple sub-class associations for SAP 
ingress classification purposes. Each sub-class retains the chassis wide behavior defined to the 
parent class while providing expanded ingress QoS classification actions. Sub-classes are created 
to provide a match association that enforces actions different than the parent forwarding class. 
These actions include explicit ingress remarking decisions and color aware functions.

All non-profiled and profiled packets are forwarded through the same ingress access queue to 
prevent out-of-sequence forwarding. Profiled packets in-profile are counted against the total 
packets flowing through the queue that are marked in-profile. This reduces the amount of CIR 
available to non-profiled packets causing fewer to be marked in-profile. Profiled packets out-of-
profile are counted against the total packets flowing through the queue that are marked in-profile. 
This ensures that the amount of non-profiled packets marked out-of-profile is not affected by the 
profiled out-of-profile packet rate. 

Service Ingress QoS Policies

Service ingress QoS policies define ingress service forwarding class queues and map flows to 
those queues. When a service ingress QoS policy is created by default, it always has two queues 
defined that cannot be deleted: one for the default unicast traffic and one for the default multipoint 
traffic. These queues exist within the definition of the policy. The queues only get instantiated in 
hardware when the policy is applied to a SAP. In the case where the service does not have 
multipoint traffic, the multipoint queues will not be instantiated.

Summary of Contents for 7950





































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7950

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Brand: Canon Pages: 30
D-Link xStack Storage DSN-4000 Series Datasheet preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 5
Abocom MH200 Quick Installation Manual preview
MH200
Brand: Abocom Pages: 11
Abocom CWB1000 Quick Installation Manual preview
CWB1000
Brand: Abocom Pages: 19
PaloAlto Networks PA-7500 Quick Start Manual preview
PA-7500
Brand: PaloAlto Networks Pages: 3
MikroTik RouterBOARD SXT 5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD SXT 5HnD
Brand: MikroTik Pages: 2
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Hirschmann OCTOPUS 5TX-EEC Description And Operating Instructions preview
OCTOPUS 5TX-EEC
Brand: Hirschmann Pages: 6
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
bintec elmeg RM7000 Installation Manual preview
RM7000
Brand: bintec elmeg Pages: 33
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Brand: US Robotics Pages: 180
Patton ipRocketLink 3101 Series Getting Started Manual preview
ipRocketLink 3101 Series
Brand: Patton Pages: 119
Edgewater Networks EdgeMarc 4300T Installation Manual preview
EdgeMarc 4300T
Brand: Edgewater Networks Pages: 23
Gbord EN-203 User Manual preview
EN-203
Brand: Gbord Pages: 11
Belkin F5D7230au4P Manual preview
F5D7230au4P
Brand: Belkin Pages: 2
TDT VR2020 Series Initial Start-Up Manual preview
VR2020 Series
Brand: TDT Pages: 8

Brands by name

Popular brands

Load more brands