Alcatel-Lucent 7950 XRS Series, Configuration Manual

Page: 369 / 502

System Management
7950 SR OS Basic System Configuration Guide Page 369
Parameters
seconds — The interval, in seconds, between runs of an event.
Values
30 — 4,294,967,295
minute
Syntax [ no ] minute { minute-number [.. minute-number ]| all }
Context config>cron>sched
Description
This command specifies the minute to schedule a command. Multiple minutes of the hour can be specified.
When multiple minutes are configured, each of them will cause the schedule to occur. If a minute is
configured, but no hour or day is configured, the event will not execute. If a minute is configured without
configuring
month , weekday , day-of-month , and hour , the event will not execute.
The no form of this command removes the specified minute from the configuration.
Parameters minute-number — Specifies the minute to schedule a command.
Values 0 — 59 (maximum 60 minute-numbers)
all — Specifies all minutes.
month
Syntax [ no ] month { month-number [.. month-number ]| month-name [.. month-name ]| all }
Context config>cron>sched
Description This command specifies the month when the event should be executed. Multiple months can be specified.
When multiple months are configured, each of them will cause the schedule to trigger. If a month is
configured without configuring
weekday , day-of-month , hour and minute , the event will not execute.
The no form of this command removes the specified month from the configuration.
Parameters
month-number — Specifies a month number.
Values
1 —12 (maximum 12 month-numbers)
all — Specifies all months.
month-name — Specifies a month by name
Values
january, february, march, april, may, june, july, august, september, october, november,
december (maximum 12 month names)