Alcatel-Lucent 7950 SR, System Management Manual

Page: 378 / 462

Log Filter Entry Match Commands
Page 378 7950 SR OS System Management Guide
Log Filter Entry Match Commands
match
Syntax [ no ] match
Context config>log>filter filter-id >entry entry-id
Description This command creates context to enter/edit match criteria for a filter entry. When the match criteria is
satisfied, the action associated with the entry is executed.
If more than one match parameter (within one match statement) is specified, then all the criteria must
be satisfied (AND functional) before the action associated with the match is executed.
Use the application command to display a list of the valid applications.
Match context can consist of multiple match parameters (application, event-number, severity,
subject), but multiple
match statements cannot be entered per entry.
The no form of the command removes the match criteria for the entry-id .
Default No match context is defined.
application
Syntax application { eq | neq } application-id
no application
Context config>log>filter filter-id >entry entry-id >match
Description This command adds an OS application as an event filter match criterion.
An OS application is the software entity that reports the event. Applications include IP, MPLS, OSPF,
CLI, SERVICES etc. Only one application can be specified. The latest
application command
overwrites the previous command.
The no form of the command removes the application as a match criterion.
Default no application — No application match criterion is specified.
Parameters eq | neq — The operator specifying the type of match. Valid operators are listed in the table below.
application-id — The application name string.
Values port, ppp, rip, route_policy, rsvp, security, snmp, stp, svcmgr, system, user, vrrp,
vrtr
Operator Notes
eq equal to
neq not equal to