Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 619 / 674

Cflowd
7750 SR OS Router Configuration Guide Page 619
Version 9 and Version 10 Templates
If the collector is configured to use either version 9 or 10 (IPFIX) formats, the flow data is sent to
the designated collector using one of the pre-defined templates. The template used is based on the
type of flow for which the data was collected (IPv4, IPv6, MPLS or Ethernet (Layer 2)), and the
configuration of the
template-set parameter. Table 12 indicates the relationship between these
values and the corresponding template used to export the flow data.
Each flow exported, to a collector configured for either v9 or v10 formats, will be sent using one of
the above flow template sets. As described above, which template is used is based on the flow type
and how the collector’s template-set parameter is configured.
The following tables specify the fields present in each template:
Table 12: Template-Set
Traffic type Basic MPLS-IP
IPv4 Basic IPv4 MPLS-IPv4
IPv6 Basic IPv6 MPLS-IPv6
MPLS Basic MPLS MPLS-IP
Ethernet
L2-IP L2-IP
Table 13: Basic IPv4 Template
Field Name Field ID
IPv4 Src Addr 8
IPv4 Dest Addr 12
IPv4 Nexthop 15
BGP Nexthop 18
Ingress Interface 10
Egress Interface 14
Packet Count 2
Byte Count 1
Start Time 22
End Time 21