Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 399 / 496

Interface Configuration
7710 SR OS Interface Configuration Guide Page 371
Ports on Slot 1
==============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port SFP/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
------------------------------------------------------------------------------
1/1/1 Down No Down 1518 1518 1 accs dotq gige
1/1/2 Down No Down 1578 1578 - netw null gige
1/1/3 Down No Down 1578 1578 - netw null gige
1/1/4 Up No Down 1514 1514 - accs null gige
1/1/5 Up No Down 1578 1578 - netw null gige
==============================================================================
*A:ALU-1#
Specific Port Output Fields
Specific Port Output — The following table describes port output fields for a specific port.
Label Description
Description A text description of the port.
Interface The port ID displayed in the slot/mda/port format.
Speed The speed of the interface.
Link-level
Ethernet —
The port is configured as Ethernet.
SONET —
The port is configured as SONET-SDH.
MTU The size of the largest packet which can be sent/received on the Ether-
net physical interface, specified in octets.
Admin State
Up —
The port is administratively up.
Down —
The port is administratively down.
Oper State
Up —
The port is operationally up.
Down —
The port is operationally down.
Additionally, the lag-id of the LAG it belongs to in addition to the
status of the LAG member (active or standby) is specified.
Duplex
Full —
The link is set to full duplex mode.
Half —
The link is set to half duplex mode.
Hold time up The link up dampening time in seconds. The port link dampening timer
value which reduces the number of link transitions reported to upper
layer protocols.
Hold time down The link down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
Physical Link
Yes —
A physical link is present.
No —
A physical link is not present.