Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 291 / 496

Interface Configuration
7710 SR OS Interface Configuration Guide Page 265
SONET/SDH Path Commands
path
Syntax [ no ] path [ sonet-sdh-index ]
Context config>port>sonet-sdh
Description This command defines the SONET/SDH path.
The no form of this command removes the specified SONET/SDH path.
Default
full channel (or clear channel)
Parameters
sonet-sdh-index — Specifies the components making up the specified SONET/SDH path. Depending on the
type of SONET/SDH port the sonet-sdh-index must specify more path indexes to specify the payload
location of the path. The sonet-sdh-index differs for SONET and SDH ports.
Syntax
: sts1- x . x
In addition the support of virtual tributary circuits adds an additional level of complexity and several
addition levels of indexes.
payload
Syntax payload { sts3 | tug3 | ds3 | e3 }
Context config>port>sonet-sdh>path
Description This command specifies if the associated SONET/SDH path is an asynchronous circuit or a virtual tributary
group (VT). This command is only applicable to channelized MDAs.
Default none
Parameters sts3 — Configures STS3/STM1 payload as clear channel.
tu3 — Configures STS3/STM1 payload as Tributary Unit Group 3 (TUG3).
SONET SDH
OC-48 STS-12-index
STS-3-index
STS-1-index
STM-16 AUG-4-index
AUG-1-index
AU-3-index
OC-12 STS-3-index
STS-1-index STM-4 AUG-1-index
AU-3-index
OC-3 STS-1-index STM-1 AU-3-index