Alcatel-Lucent 7705 SAR, System Management Manual

Page: 61 / 356

Security
7705 SAR OS System Management Guide 61
Configurations
• Enabling Authentication
• Configuring Authorization
• Configuring Accounting
Enabling Authentication
To use authentication on the router, configure one or more servers on
the network.
Use the following CLI commands to configure authentication:
CLI Syntax:
config>system>security
tacplus
server server-index address ip-address secret
key [hash1 | hash2]
single-connection
timeout seconds
no shutdown
The following example is configured in the
config>system
context:
Example:
security# tacplus
security>tacplus# server 1 address A:A:A:A:A:A:A:1
secret test1
security>tacplus# server 2 address 10.10.0.6 secret test2
security>tacplus# server 3 address 10.10.0.7 secret test3
security>tacplus# server 4 address 10.10.0.8 secret test4
security>tacplus# server 5 address 10.10.0.9 secret test5
config>system>security>tacplus# single-connection
config>system>security>tacplus# timeout 5
config>system>security>tacplus# no shutdown
The following example displays the authentication configuration:
ALU-1>config>system>security>tacplus# info
----------------------------------------------
timeout 5
single-connection
server 1 address A:A:A:A:A:A:A:1 secret "h6.TeL7YPohbmhlvz0gob."
hash2
server 2 address 10.10.0.6 secret "h6.TeL7YPog7WbLsR3QRd." hash2
server 3 address 10.10.0.7 secret "h6.TeL7YPojGJqbYt85LVk" hash2
server 4 address 10.10.0.8 secret "h6.TeL7YPoiCfWKUFHARvk" hash2
server 5 address 10.10.0.9 secret "h6.TeL7YPojuCyTFvTNGBU" hash2