Alcatel-Lucent 7705 SAR, System Management Manual

Page: 126 / 356

Security Command Reference
126 7705 SAR OS System Management Guide
server
Syntax server index address ip-address secret key [ hash | hash2 ] [ port port ]
no server index
Context config>system>security>tacplus
Description
This command adds a server and configures the server IP address, index, and
key values.
Up to five servers can be configured at any one time. servers are accessed in
order from the lowest index to the highest index for authentication requests.
The no form of the command removes the server from the configuration.
Default
no servers are configured
Parameters
index — the index for the server. The index determines the sequence in which the
servers are queried for authentication requests. Servers are queried in order from the lowest
index to the highest index.
Values
1 to 5
ip-address — the IP address of the server. Two servers cannot have the
same IP address. An error message is generated if the server address is a duplicate.
Values
ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
key — the secret key to access the RADIUS server. This secret key must match the password on
the server.
Values up to 20 characters in length
hash — specifies that the key is entered in an encrypted form. If the hash parameter is not used,
the key is assumed to be in an unencrypted, clear text form. For security, all keys are stored
in encrypted form in the configuration file with the
hash parameter specified.
hash2 — specifies that the key is entered in a more complex encrypted form. If the hash2
parameter is not used, the less encrypted hash form is assumed.
port — the port ID
Values 0 to 65535