The MS-551 modulators use an 8 pin Mini-Din cable that is available from your local ALCAD
dealer. The mini DIN connection is located on the front of the modulator. Please look at picture
below for example.
In connecting the audio and video sources, two types of cables are available:
•
CD-003 (cod. 9120098)
Stereo, with a miniDIN to SCART (EuroConnector) connection.
•
CD-113 (cod. 9120094)
Stereo, with a miniDIN to RCA connection.
1.0 Programming of the Modulator
To program the modulator, place the programming switch in the ON (upward) position which
can be seen from picture below. When you turn the switch in the “ON” position the
programming indicator will light up. While the programming indicator remains lit, the channel
processor is ready to receive data from the PS programmer. When the modulator has been
programmed, programming mode should be deactivated by placing the switch in the OFF
position. The programming indicator light will go out.