Alcad 912-TT, Quick Programming Manual

Page: 3 / 6

QUICK PROGRAMMING GUIDE 912-TT DVB-S/S2 TO DVB-T
ENG
Start/on
912-MS Modulators
912-TT Transmodulator DVB-S/S2 to DVB-T
Select series
Confi gure module
912-TT Transmodulator DVB-S/S2 to DVB-T
Power LNB
off
off off
on
Symbol rate
Auto
1000
KBd
1952 Input frequency MHz
Input level
BER 65
< 1E-7 dBuV
Standard DVB-T
DVB-T
DVB-H
Program by
Channel
Channel
Frequency
Transcodifi cador 912 QPSK - COFDM
NIT table
Select series
Main menu
Channel table
BG CCIR
Channel 21
Press the Power On key of the PS-011 to start up the
system.
Set the programming switch of the 912-TT module to the ON position. The programming
indicator will now light up and remain lit.
Choose Select Series to select the programming series.
Select the series: 912-TT Transmodulator DVB-S/S2 to
DVB-T.
To commence programming the module, select Confi gure
module .
Select LNB power on/off. Then press T to transmit.
Using the numeric keypad, enter the FI frequency of the
transponder. Then press T to transmit.
Enter the input frequency of the transponder using
the numeric keypad. Then press T to transmit.
When the input transponder data have been entered,
press the READ key to obtain a reading of the input
signal.
Select the COFDM modulation standard. Then press T
to transmit.
Select the programming mode for the output of the
module: channel or frequency. Then press T to transmit.
Select the standard for the output channel. Then press
T to transmit.
If the output is programmed by channel, it is possible to
enter the channel using the numeric keypad. Alternatively,
you can select a channel from the pull-down list. When
you have confi rmed your choice by pressing OK, press
T to transmit.
OK+

+OK+T
T
OK+

+OK+T
Select the standard DVB-S/DVB-S2. By default it is
set to Auto. Then press T to transmit.
OK
OK
OK
READ
OK+

+OK+T
OK+

+OK+T
T
T
OK+

+OK+T
o
Input
Output
Select the forward error correction rate (FEC) of the
transponder. By default it is set to Auto. Then press T to
transmit.
OK+

+OK+T
OK+

+OK+T
Select the modulation QPSK/8PSK. By default it is set
to Auto. Then press T to transmit.
OK+

+OK+T
Select the roll off. Then press T to transmit.
OK+

+OK+T
Standard
DVB-S2
Modulation
QPSK
Roll off
0.35
FEC Auto
Enter the symbol rate of the transponder using the
numeric keypad. Then press T to transmit.