Select On to supply power the LNB. Then press the
T
key.
ENG
QUICK PROGRAMMING GUIDE
912-TQ
Press any key to turn on the PS-003.
Input frequency
1325 MHz
Output channel
B/G CCIR C21
Symbol Rate QPSK
27500 Kbaud
FEC QPSK
Auto
QPSK Spectrum
Auto
Modulation
64-QAM
Symbol Rate QAM
Auto
-= PS-003 =-
v: 4.3
Serie 912
TQ
LNB feed
On
QAM Spectrum
Normal
Read
series number:
Table of channels
B/G CCIR
B.E.R. QPSK
2E-8 __!_____
Set the programming switch of the TQ module to the ON position.
The programming indicator will immediately light up.
Set the programming switch of the TQ module to the OFF position.
The programming indicator will immediately go out
Use the arrows to select by channel (the table of channels
in accordance with the standard of the country) or by
frequency where the equipment is being used.
Note 1
: You can send all the data to the module, in a single go by pressing
F
+
COPY
.
Press the
F
key followed by
SERIE+
to set the programmer
to select the series to be programmed. Use the arrows
to select
SERIE 912 TQ
, then press
q
.
Enter the output channel of the TQ module using the arrows
or the digital keypad. Then press
T
to transmit.
Select the Symbol Rate (SR) of the transponder integrated
in the TQ module. Then press
T
to transmit.
Select the forward error correction (FEC) of the QPSK
transponder intégré in the TQ module; by default it is set
to Auto. Then press
T
to transmit.
Select the QPSK spectrum; by default it is set to Auto. Then
press
T
to transmit.
Press
T
if you wish to obtain the series number of the TQ
module.
Enter the input IF (intermediate frequency) of the TQ module
using the arrows or the digital keypad. Then press
T
to
transmit.
Select the type of QAM modulation. Then press the
T
key
to transmit.
Select the Symbol Rate (SR) of the QAM transponder
integrated in the TQ module; by default it is set to Auto.
Then press
T
to transmit.
Select the QAM spectrum, normal or inverted. Then press
the
T
key to transmit.
Obtain the QPSK signal quality by pressing
F + READ
.
