ALBtelecom ALBtv, User Manual, Page: 11 / 16

Important Safety Instructions
Installation
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with a dry cloth.
• Once removed from the transit packaging, the apparatus
must be handled with care and must not be dropped, shaken or
exposed to any physical shock.
• Disconnect the apparatus from the mains before you start any
installation procedures.
• The apparatus is designed to be placed horizontally on a hard
flat surface.
• Do not place the apparatus where it may be subject to physical
shock or vibration or where the product may drop, topple, slide
or shake as this may cause personal injury or irreparable damage
to the product, which will not be covered by the manufacturer’s
warranty.
• Do not stand the apparatus on a soft surface such as carpets or
soft furnishings etc as these surfaces will obstruct airflow, may
cause the product to overheat and will invalidate the warranty.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install the apparatus into any built-in installation such as
a bookcase or rack without ensuring that a minimum of 100mm
(4”) of clear space is available at the front, rear, sides and top of
the product.
• Do not install the apparatus near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat, or where it may be exposed to
direct sunlight.
• Do not cover the apparatus.
• Do not stack electronic equipment on the top of the apparatus
or place on top of any surface that may become warm in use
(such as an AV amplifier).
• “WARNING” - To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
• Do not use this apparatus near water.
• Do not expose the apparatus to dripping or splashing; no
objects filled with liquids such as vases should be placed on the
apparatus.
• Do not pick up or move the apparatus whilst it is operating. If
the product must be moved, please unplug the lead from the
wall socket and wait 30 seconds before moving the product.
• The apparatus is not suitable for outdoor use. The leads and
power-supply cord must be routed where they cannot be
walked on, chafed, tripped over or pinched by items being
placed on or against them. Power-supply cords must not be
routed underneath carpets or rugs where any damage could
not be seen.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Operate the apparatus only from the type of power supply
supplied by the manufacturer and as indicated on the marking
label. The mains lead is fitted with a plug that is designed for use
with the power source of the country of installation.If you are
not sure of the power supplied to your home, consult your local
power company.
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
• Do not defeat the safety purpose of the polarised or
grounding-type plug. A polarised plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
• Only use attachments and accessories specified by the
manufacturer.
• Refer all servicing to qualified service personnel.Servicing is
required when the apparatus has been damaged in any way,
such as the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• No naked flame sources, such as light candles, should be
placed on the apparatus.
• Disconnect the apparatus from the wall outlet before cleaning.
Operation
The apparatus and power-supply will get warm to the touch
when in use. If the apparatus,power-supply or attachments
become hot to the touch, immediately unplug the apparatus
from the mains electricity supply and call your service provider
to arrange replacement.
Lightning Protection and Not in Use
If lightning is expected, or the product is not going to be used
for a long period of time, please unplug the mains lead from
the wall outlet, unplug the digital TV network connection from
the rear of the product and unplug the video and RF leads to
the television.
Use with Plasma Displays
When used with certain display types, such as plasma displays,
it is important that the picture is not paused for a long time
(greater than 5 minutes) as the image displayed may then be
‘burned’ permanently into the screen of the display device.
This effect is not a defect of the apparatus but a limitation of
the display device. Amino Communications Ltd. will not be held
liable for damage so caused.