4
Alkaline Batteries shall not be used
, because Alkaline batteries
do not meet the requirements for keeping the maximum output
power more stable for the whole operating time). The charging time
is typically 12-15 hours. You can charge one or both radios at the
same time with the supplied desk charging cradle. It is also
possible to charge one radio by inserting the charge cable into the
Charge / Headset socket.
Installation of the batteries
Battery installation is made more convenient when the belt clip is
either rotated left or right to the horizontal position, or is removed.
simply rotate the clip in either direction to the horizontal position. Be
careful not to use excessive force. To remove the clip, press down
on the spring release tab and pull the clip straight out from the radio
body.
1. Using thumb, press down on battery cover at arrow and slide
cover down.
2. Then lift cover at bottom to open. Remove cover.
3. Insert three AAA NiMH batteries (positive (+) end toward the
top beginning at left side and alternating positive terminals as
shown).