28
English
This will prompt any receiving unit that your transmission has ended.
When the Roger Beep tone is enabled, the tone icon appears on the
LC Display.
Keypad Program Tone Setting
When a key is pressed, a beep tone is heard to confirm your
command. The user may enable or disable this keypad program tone.
When the Keypad tone is enabled, the tone icon appears on the LC
Display.
Stop Watch function
This function will enable a one hour timer function.
1. Press the
MENU
button eleven times, until the Stop Watch
icon and the 00:00 indication will blink on the LC Display.
2. Press the
CH UP
button to start counting and press the
CH DOWN
button to stop the function. The radio can still
operate in this mode.
3. Press the
CH UP
button again to re-start.
4. To reset the timer press the
CH DOWN
button two times.
5. To exit to Stand-by mode press the
LOCK
button.
Keypad Lock
To avoid entering unwanted command, press and hold the
LOCK
button for about 2 seconds. The Lock icon will appear on the LC
Display. When the keypad is locked, only the
PTT
,
CALL
and
Monitor
buttons are enabled. To unlock the keypad press and hold the
LOCK
button for about 2 seconds.
LCD Backlight
Shortly press the
MONITOR
button to backlight the LC Display. Press
this button again to turn OFF the LCD backlight.
Monitor Function
Press and hold the
MONITOR
button for about 4 seconds to activate
the Monitor function. Press
MONITOR
button once to return.
If require to listen to weak signal with background noise temporarily,
press and hold
MONITOR
button for about 2 seconds. You will hear
Summary of Contents for Tectalk Float
