Albrecht DR 490, Manual

Page: 44 / 104

44 English
English
You can choose between 2 regular alarms ( Alarm 1 and Alarm 2 ) or the NAP Alarm in this menu.
Press on the remote control to enter the menu directly.
To set Alarm 1 or Alarm 2 , press and turn it on . Now choose the frequency (daily, once or
on specifi c days of the week, e.g. Monday to Friday). Next choose the desired alarm source: Beep
tone, Melody, Internet Radio, FM Radio or DAB/DAB+ Radio. Afterwards you can leave the settings
by pressing
or ◄.
At the time of the alarm the radio connects to the Internet if the set network is available. Therefore
there may be some delay before the radio starts playing your station. If no network connection is
established within one minute, the alarm will change automatically to Melody.
If the NAP alarm is activated, it alarms once after 5/10/20/30/60/90/120 minutes depending on
which one you have set.
You may choose Alarm Volume to confi gure the volume of the alarms. During the alarm the volume
will increase automatically up the set value (Crescendo function).
When an alarm is set, there will be a clock icon at the top of the display. The clock icon with alarm
time will also be displayed on the standby screen.
During alarm, press any key to enter snooze mode. It will alarm again after 5 minutes. Press the
key to stop the alarm.
12.6. Timer
Press ◄/► to set the timer, press OK to start. The timer will count down and play beep sound when
it reaches 00:00. To cancel the timer, enter the timer screen and press OK again. When the timer
is running, you can change the mode, the remaining time is then displayed in the top right of the
display.
12.7. Language