Albrecht DR 460, Instruction Manual

Page: 43 / 96

10
1. Place DR 460 on a flat surface.
2. Connect power cable and turn on the radio.
8. Setup
8.1 Setting the language
The default language is English. To change this, select Menu >
System settings > Languages > then select your language.
8.2 Setting the time/date
The time and date can be updated manually or automatically.
Setting manually is simpler, but the time and date are lost when power is
removed.
Setting to update automatically is a little more complicated at first, but
the time and date are automatically synchronised with external clocks,
so it should only need to be done once. Auto update is generally more
accurate.
To enter the Time settings menu, select Menu >
System settings >
Time/date >
Manual time setting update
Select Set time/date >
The date and time are displayed as dd-
mm-yyyy and hh:mm AM/PM with the first
value,
dd active (flashing).
Adjust each value with the Select
control. As each value is adjusted, the
next value becomes active and flashes.
When you select the final value (minutes
or AM/PM, depending on whether the
clock is set to 12 or 24 hour mode), the
display reverts to the
now playing screen
and shows the newly updated time.
Auto time setting update
Auto update works with data sent over the network (This function is only
available in specific models). The clock is only updated when in a
corresponding mode, so it is best to select a mode you use regularly.
o
Network uses a time signal sent from the Frontier Silicon Internet
radio portal when in Internet radio or Music player modes.