Albrecht DR 460-W, Instruction Manual, Page: 51 / 108

14
11.4 Establishing a wireless connection
NOTE! This is only needed if a connection has not already been established on the
first power on or the DR 460-W needs to connect to a different network.
1. Set up your access point (AP) to receive/broadcast a wireless signal.
2. From the main menu, select Configure > Network > WiFi Configure. The names of
the receivable access points are listed. If you highlight a protected network, a key
icon will show in front of the SSID of the wireless network.
12:00PM
12:00PM
Manage my mediaU
Wireless Network Configuration
Network
Wireless Network (WPS PBC)
Date & Time
Manual Configuration
< 2/12 >
< 1/4 >
12:00PM
Enable
Disable
< 2/12 >
3. Select a network you have access to. If the network is not secured, press the
enter button to make a connection. If it is secured, you will be asked to enter the
passphrase.
12:00
Enter WEP/WPA
525
3/3
←MOVE→ INPUT:0-9↑↓
OK
4. Input the appropriate passphrase and press Enter to make a connection. Refer to
the “Text entry” section for details about inputting text.
5. The following icons will appear at the upper left corner of the display to indicate
network status: