Albrecht digi-TV 200, User Manual, Page: 19 / 25

First Time to Setup
When the first time this unit is turned on, please follow the following
steps to finish the initialization.
1
3 4
5 6
2
Press [MENU] button first and
then press [VOL-] button to enter
the menu for system configuration
selection.
Press [VOL+] button and highlight
your
TV system output and press
[OK] button.
Press [VOL+] button and highlight
your
OSD language and press
[OK] button.
Press [VOL+] button and highlight
your region and press [OK] button.
Press [VOL+] button to adjust the
brightness level of the display and
press [OK] button.
Time will automatically set by your
region. If you need to correct it,
press [CH+] button or [CH-] button
to adjust the time.
- 13 -