8
•
Slowly slide the radio into the sleeve until it locks in place.
•
The rubber ring will act as a seal against DIN Sleeve. At the left and right sides
of the ring a slot space will be provided by pulling slowly the left and right side
of the ring.
•
The slots in the fitted rubber ring will enable the proper removal of radio from
the DIN sleeve.
≫
≫
≫
≫
Removing the radio from DIN Sleeve
If you plan to remove the radio from DIN Sleeve, you should do it using the provided
two removal keys as explained below:
•
Fully insert both removal keys straight into the slot spaces provided by rubber
ring on the left and the right edges of the radio front panel.
•
You cannot remove the radio if only one key is used.
•
Press in fully and the radio will unlock from the sleeve making withdrawal from
the sleeve possible.
•
Store the keys in a safe place for future use.
