background image

24

1. Press AUTO. AUTO appears.

2. Pressing AUTO key or turn TUNE knob, to select the channel bank where you
want to store monitor memory frequencies. If you select a bank that contains at least
one empty channel, a bar flashes under the bank number, and AC-, the number of
empty channels in the bank, CH, and AUTO appears.

Notes:

l

 To select bank 10, press 0.

l

 If you do not want to select the bank, press the bank's number key.

If you select a bank that does not contain any empty channels, a bar flashes under
the bank number, and A-FULL and AUTO appear. To store new frequencies into this
bank, you must delete one or more frequencies stored in it, then repeat Step 2. See
"Deleting Frequencies."

3. Press and hold down ENTER, then press MON. A bar flashes under the bank
number, and AC-, the number of empty channels in the bank, CH, and AUTO appear.
The scanner moves frequencies stored in monitor memories into the bank you
specified in Step 2.

Moving Frequencies from Banks to Monitor Memories

You can move all stored frequencies within a bank to monitor memories. This lets
you quickly clear channels within a bank without losing the frequencies.

Caution: If you move frequencies from a bank to monitor memories, all frequencies
already in the monitor memories are replaced with those frequencies and any empty
channels from the bank.

1. Press AUTO. AUTO appears.

2. Pressing AUTO key or turn TUNE knob, to select the channel bank.

3. Press and hold down ENTER, then press DIRECT/

. The scanner automatically

moves all frequencies in channels within the bank to monitor memories.

DELETING FREQUENCIES

Deleting a Frequency from a Channel or Monitor Memory

1. Press PGM.

Summary of Contents for AE 100T




































Reviews: