2.1.3. Assembling and adjusting the adjustable handle
1.
By loosening the two fixing screws you can remove the forearm shell from the
hinge rod.
Note: two longer screws are enclosed with the handle.
2.
Now place the mounting rod of the handle between the hinge rod and
forearm shell.
3.
After aligning the components, insert the longer fixing screws provided into
the threaded holes in the hinge rod.
To adjust the length of the handle to the length of the arm, lift the pad off
the screws to allow the screws to be loosened by one turn. After adjusting
the handle, tighten the screws again.
4.
You can adjust the angle of the handle infinitely from 70° pronation to
70° supination by loosening the knurled screw and fixing it in the desired
position.
1
2
3
4
www.albrechtgmbh.com
9
User Instructions