Albrecht Audio DR 53, Manual

Page: 17 / 48

17
English
2. Delivery content
• Albrecht DR 53 adapter
• Viewing angle stand
• Remote control with batteries
• RCA to RCA audio cable
• RCA to 3.5mm adapter
• Cable antenna
• Power supply
• User manual
3. Before you start
3.1. Power connection
1. Install the viewing angle stand on the backside of the adapter. You can select between „Lower
view angle“ (62°) and „Higher view angle“ (70°).
2. Connect the power supply into the socket on the back of the adapter and place the cable
antenna to a free space to obtain the maximum signal strength.
3. Connect the RCA audio cable with the Audio Out socket of the Albrecht DR 53 and the other end
to a suitable audio output device like home stereo system, active speakers, etc.
4. Plug the power supply into the mains power wall socket.
5. The adapter starts automatically and performs a full scan of the DAB+ band the first time it is
used.
6. When scanning is complete, the radio will select the first available station and begin the
playback. By default, stations are sorted first by numbers and then by letter.
7. Press the button to put the adapter into standby.
4. Basic functions
4.1. Adjusting the volume
Use the volume keys / on the remote control to adjust the volume.
4.2. MENU navigation
• Press the Home button to open the main menu
• Use the arrow keys ▲/▼ to scroll through the MENUs
• Move to the next sub MENU by pressing OK
• Go back to the previous MENU by pressing
4.3. Change mode between DAB+, FM and Bluetooth
Press the mode button on the remote control or at the top side of the adapter to switch
between DAB+ / FM / Bluetooth mode