Albrecht Audio 27425, Manual

Page: 48 / 100

48 English
English
13. Troubleshooting
Error Remedy
The device does not switch on. 1. Check if the power adaptor is connected properly.
2. The device may malfunction when used in areas
with strong radio interference. The device will work
properly again once there is no more interference.
No sound 1. Turn on the sound as it may be muted
2. Increase the volume.
No network connection can be
established.
1. Check the WIFI function.
2. Try to set an IP address at the device.
3. Activate the DHCP function on the router and make
the connection again at the device.
4. A firewall is activated on the network – set the
respective program in such a way that access is
possible.
5. Reboot the unit to try.
WIFI connection cannot be
established.
1. Check the availability of WIFInetwork on the access
point.
2. Place the device closer to the router.
3. Make sure the WEP/WPA password is correct.
No station is found. 1. Check the network as well as the access point and
firewall.
2. The station may not be available currently, try it again
later or select another station.
3. The link of the station is changed or the station no
longer transmits – ask the provider for information.
4. The link of manual added station is not correct, make
sure it is correct and re-enter.
Alarm does not work. 1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of “No
sound”.
3. The source of alarm was set to be station but there is
no network connection. Change the source of alarm or
reconfigure the connection.
Unable to do DLNA streaming. 1. Check the connection of the network. DR 425 IR and
your device need to be in the same network; and test
if the network in good condition.
2. Make sure the settings on your device are correct.