Alberici LYNX CBN cctalk Italy, Operator'S Manual

Page: 7 / 18

5.
Installation
5.1
Dimensions
The front panel of the LYNX reader can be positioned outside or inside the cabinet.
Its snap-in/clip-out system easily delivers the reader body in hand for any quick maintenance operation.
5.2
Connections
5.2.1 ccTalk socket pin-out
6.
Operation
When the card reader is in stand-by, its LEDs light up in still blue color.
While the card is being introduced into the reader slot, the LEDs light up in still yellow color.
When the card has been completely inserted to the bottom end, two cases are possible:
1.
the reader recognizes the card and reads the data: the LEDs light up green. They remain lit in green for about 4 seconds.
Then they turn off and stay off as long as the card stays inside the reader.
2. the reader does not recognize the card, or it fails reading the card data: the LEDs light up red, as long as the card remains
inside the reader.
When the card is removed, the LEDs light up again in still blue.
On reset, no card or foreign body must be inside the reader. If on reset the reader detects the presence of a card, the error
status will be shown by the LEDs flashing in red colour (one flash per second). The LEDs colour will be restored to still blue, and
the player returns to stand-by condition, only when the card is removed.