10
· Secure the tilt support in the
holding device [d] with the
quick pins [b]. Press the
locking mechanism in the
center of the locking pin and
push the pin entirely into the
holding device.
· Check whether the quick pins
[b] securely rest in the
holding device [d]. You are
not supposed to be able to
remove them without
pressing the locking
mechanism in their center.
· To remove the tilt support,
work your way back step by
step.
Driving the e·motion without attached tilt
support is not safe, thus not admissible.
The CE conformity for the e·motion is only valid in combination
with the tilt support. In addition, the following points have
to be taken in consideration:
· Assembly and repairs as well as any other work done on the
e·motion must be carried out by Ulrich Alber GmbH + Co.
KG or any other personnel authorized by alber.
· The lower part of the tilt support must be attached high
enough so that their wheels can rotate freely when the
wheelchair is on a horizontal level.
· The user must pay particular attention to the following:
a) The tilt support must be unobstructed.
b) Please be extra careful when driving over obstacles
higher than 40 mm and narrower than the sidewalk’s curb.
c) The critical height of obstacles must be tested individually
for each wheelchair equipped with the e·motion and his/her
driver.
d) The point at which a certain wheelchair equipped with
the e·motion tilts backwards at its back axle must also be
tested by its user. The critical limit is reached at the point
where the tilted wheelchair falls backwards.
a
c
b
a
c
b
Summary of Contents for e-motion
Page 1: ...User s manual ...
