3
Approaching a table
Moving away from a table
• When approaching the edge of a table with your
wheelchair, remain far enough from the table so
that it is still possible to move the swivel arm.
• Press the control button [1] and swing the swivel
arm to the desired lateral position. At an angle
of approx. 45 degrees you will hear a soft
“clicking” sound. If the swivel arm is swung back
to its starting position from this position, it then
locks back into this position automatically.
• Now move closer to the table at low speed and
exercise caution in doing so.
• Switch off the control unit if it is not being
used!
• Switch on the control unit if necessary.
• Move back slightly from the table and do so
slowly.
• Swing the swivel arm back to its starting
position. It will lock into this position
automatically.
• You can now continue to move as usual
Always switch off the control unit if it is not being used! This prevents your
wheelchair from rolling away unintentionally, e.g. due to accidental contact with
the joystick.
!
Example of use for swivel arms e-fix E25 and E35
1
E 25
1
E 35
Instructions for use swivel arm e-fix
