UXBM Harness and Tab Washer Installation
4200-088
9-3
Revision 1.03
The following illustration only gives one possible scenario of how the actual power supply leads are
connected to the battery. Make sure the UXCM and UXSM power leads are installed first; they should be
closest to the battery post. Then the brass 2-tabbed washers, flat washer and lock washer with nut are
installed and should be located on top of the power leads.
Torque all bolts/nuts to the manufactures specification when assembling the connections.
Figure 7 - Exposed Post Power Lead and Tab Washer Assembly
