albatros MASTER 70 ECO, Manual

Page: 15 / 16

15
Please note:
The sponge or HEPA filter material in the cleaner will became dusty over time. This is normal and will
not affect the performance of the filter. If the sponge filter is so dusty that suction does not return to
100%, then we suggest that the filter be removed then rinsed under the faucet and allowed to dry for 24
hours by airing not near the fire or some high temperature objects before refitting into the vacuum. This
should be done once six months or when suction appears to be reduced obviously.
Important:
Please note that there is a safety switch inside the vacuum to prevent the unit from being run with
high vacuum rate. If the vacuum is too high ,the safety switch will be turned on. In this case, it can minish
the vacuum rate and protect the motor from being broken.
Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will
overheat and could become damaged.
Important:
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The
filters must be replaced immediately if they become damaged. Always disconnect the vacuum from the
electrical outlet when checking the filters.