Albatron PX915GD PRO, User Manual

Page: 49 / 59

PX915PD/ PX915GD Series
44
Soft-Off by PWRBTN
In situations where the system enters a “hung” state, you can configure the BIOS so that
you are required to pre the power button for more than 4 seconds before the system
enters the Soft-Off state.
Options: Delay 4 Sec, Instant-Off (default).
Wake Up Control
If you highlight the “Wake Up Control” label and then press the enter key, it will display a
submenu with the following options:
PCI PME Wake Up
This option will also cause the system to wake up with any onboard LAN activity.
Options: Disabled (default)
、
Enabled
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call to modem
device. Options: Disabled (default)
、
Enabled.
USB KB Wake-up From S3
This item allows you to awaken the system from suspend mode using a USB keyboard.
Options: Enabled
、
Disabled (default)
* This option is configurable only when the ACPI Suspend Type is set to S3.
RTC Wake Up
When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode. Options: Enabled
、
Disabled (default).
Date (of Month) Alarm
You can choose which date of the month the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”.
Time (hh: mm: ss) Alarm
You can choose the hour, minute and second the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”.
**Reload Global Timer Events**
When a system goes into suspend mode, certain devices must be inactive for a period of
time. Conversely, if any of those devices have any activity, the system will awaken. You
can select the devices that will participate in suspend/power-on activity by configuring
these fields. Devices include: Primary IDE 0/ Primary IDE 1/ Secondary IDE 0/ Secondary IDE
1/ FDD,COM,LPT Port/ PCI PIRQ [A-D]#. Options: Disabled (default), Enabled