PX915P/ PX915G Series
36
Parallel Port Mode
This option allows you to select a parallel port mode for the onboard parallel port.
Options:
ECP (default) Extended Capabilities Port.
EPP Enhanced Parallel Port.
SPP Standard Printer Port.
ECP+EPP ECP & EPP mode.
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9. This field is only configurable if “Parallel Port Mode” is set
to “EPP” or “ECP+EPP”. Options: EPP 1.9(default)
、
EPP 1.7
ECP Mode Use DMA
Select a DMA Channel for the parallel port when using the ECP mode. This field is only
configurable if “Parallel Port Mode” is set to “ECP”. Options: 3 (default)
、
1
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a
power failure. If you select “On”, the system will boot whether or not the system was on
before power failure. If you select “Former-Sts”, the system will be restored to the status
before the power failure. Options: Off (default)
、
On
、
Former-Sts
