PX865PEC PRO
31
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)
、
Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Auto(default)
、
Disabled
、
Enabled
AC97 Audio
This item allows you to control the onboard AC’97 audio. Options: Auto (default)
、
Disabled
Onboard LAN control
This item allows you to enable or disable the LAN control. Options: Enabled (default)
、
Disabled
Onboard LAN Boot ROM
This item allows you to boot your system by LAN. Options: Enabled
、
Disabled(default)
Onboard I/O Chip Setup
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a power failure. If
you select “On”, the system will boot whether or not the system was on before power failure. If you
select “Former-Sts”, the system will be restored to the status before the power failure.
Options: Off (default)
、
On
、
Former-Sts
Power On Function
This option allows you to select a way to power on your computer. Options: Password
、
Hot KEY
、
Mouse Left
、
Mouse Right
、
Any KEY
、
BUTTON ONLY (default), and Keyboard 98
KB Power On Password
This it the password that your system will use as part of the power-on sequence. This field is only
configurable when “Power On Function” is set to “Password”.
Hot Key Power ON
This option allows you to use the Ctrl key along with a hot key (function key) to power on your
system. This field is only configurable when “Power On Function” is set to “Hot Key”.
Options: Ctrl-F1
、
Ctrl-F2…… Ctrl-F12
Onboard FDC Controller
Select “Enabled” if your system has a floppy disk controller (FDC) installed on the system board and
you wish to use it. If you install an add-in FDC or the system has no floppy drive, select “Disabled”.
Options: Enabled (default)
、
Disabled
